- 2-in-1 PH Chlorine Meter 0.5~6.0ppm CL2 Level Tester Pool Water Quality Monitor
- Double Needle Detection Multiple Scenarios
- Applicable to Water Quality Detection, Such as Drinking Water Detection Swimming Pool Laboratory, Hot spring, Swimming Pool,Hot Spring,SPA ,etc
- Stretchable Extension Cord
- Good Elasticity, Not Deformed, Elastic extension cord for extended distances for a variety of environmental measurements
Description
PC101 Swimming Pool Water Quality Tester
Professional 2 in 1 PH & CL2 Meter,Double Needle Testing Water Quality Tester,Put the Sensor Sensing Part, Gently Stir in the Water a Few Times, After a Few Seconds, Easily Get Accurate PH (5.5-9.0 PH) and CL2 (0.5- 6.0 PPM) Data. 6.0 PPM).
Easy to Use and Suitable for a Wide Range of Applications to Meet All Your Needs
CL & PH Freely Switch, Easy to Measure, Easy to Analyze The Relationship Between PH and CL. The Probe Slot Holds the Probe and the Extension Cable Can be Stretched for Easy Use and Storage. Used for Various Environmental Measurements, Suitable for Water Quality Testing, Such as Drinking Water Testing, Swimming Pool Labs, Spas, Etc. Also Suitable for Swimming Pools, Fish Tanks, Aquariums, Spas, Etc.
Tips:
- CL2 Measurement Range : 0.5-6.0
Recommended Chlorine Level for Swimming Pools and Spas is (1.2~1.7ppm).
- PH Measurement Range : 5.5-9.0
Recommended PH for Swimming Pools and Spas is (7.2~7.8)
Specifications
- Condition : 100% Brand New
- Model : PC101
- Product Name : 2 in 1 PH & CL2 Swimming Pool Water Quality Tester
- Material : Plastic + Metal
- Size : Approx. 18 x 11.6 x 3.1cm / 7.1" x 4.6" x 1.2"
- Power Supply : 1 x 1.5V AA Batteries (Not Included)
- Package Weight : 220g
Package Included :
- 1 x Water Quality Tester
- 1 x English Instructions
Water Quality Tester Quick Reference
Chlorine Test：
- Clean Probes as instructed in manual.
- Turn wheel to "adjustment point" on meter.
- Insert probes into water up to black plastic level
- Wait for needle to rest on correet reading.
PH Test :
- While probe is in water, turn wheel to pH until it Clicks.
- Wait for needle to rest on correct reading.
How to Find Adjustment Point for Chlorine Testing :
- Insert 1pc AA 1.5V battery in the compartment in the handle.
- Hold the tester in one hand and the probe in the other.
- Insert the cleaned metal probes into the water up to black b-and.
- Stir the water slightly with the probe.
- With the probe still in the water, turn the wheel on the face of the tester all the way to the left towards"CL". Slowly turn the wheel back to the right until the needle matches the chlorine level you recorded with the convention liquid tester(e.g.: 1.5ppm)
- Remove probes from the water without touching the wheel. Indicator will move all the way to the right and stop on a letter between A and E. This letter is your "adjustment point".
-
Note: Any time you use this tester to test the chlorine level, you must adjust it to the "adjustment point" before testing.
